| Customization: | Available |
|---|---|
| Display: | Digital |
| Appliance: | Food Analysis, Medical Research, Biochemistry |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
BOQU conductivity meter and conductivity sensor widely used in global,production capacity has been over 100 000pcs.TDS,Salinity and Resistivity meter use same conductivity sensor in different program.customers should confirm the application and required range before production,because there is many different range for conductivity sensor,such as :ultra pure water: 0~20μS/ cm(K=0.01),pure water is 0~200μS/ cm(K=0.1),drinking water is 200~500μS/ cm (K=1.0)in Shanghai China.max range of BOQU conductivity is 2000ms/cm.max working temperature is 180ºC by toroidal conductivity sensor(inductive conductivity sensor).it's widely used for power plant,drinking water,waste water,food,Chemical production,Leak detection in heat exchangers,Acid and caustic dilution,Metal finishing, Plating bath control,Parts cleaning and rinsing,Pickling bath control,Waste streams,Semiconductors,Pulp and paper, Black, white or green liquor,Pulp bleaching food processing,Chemical peeling,Sanitisation (CIP),Environmental Wet chemical scrubbers,Cooling towers etc
What's the technical specification of Power plant water Treatment industry EC probe ?
| DDG-2080S | DDG-2080X | DDG-2090 |
Measuring range:
0~2000000.00 us/cm(0~2000.00 ms/cm)
0~80.00 ppt
0~9999.00 mg/L(ppm)
0~20.00MΩ
-40.0~130.0ºC Accuracy:2% ±0.5ºC Power supply:90 - 260V AC 50/60Hz Communication:RS485 Modbus Waterproof grade:IP65 Relay:Two relays for high and low limit
One relay for clean
Overall dimension:144×144×104mm |
Conductivity:0.00~2000ms/cm RS485 Modbus RTU
|
Conductivity:0~19.99 uS, 0~199.9 uS, 0~1999 uS, 0~19.99mS, 0~199.9mS (K=0.01 electrode for resistivity) Accuracy 1% Temp. range:0~99C one ways of 4-20mA RS485 Modbus RTU 2 Relays Power 220VAC |
| Model | Compresssive strength |
Measuring range |
Connection | Material | Application |
| K=0.01 | 0.6MPa | 0~20us/cm | Pipes/hoses/flanged pipes,etc Diamention:Φ6,Φ8,Φ14,etc |
316L Titanium alloy | Power plant water Treatment industry |
| K=0.1 | 0.6MPa | 0~200us/cm | Pipes/hoses/flanged pipes,etc Diamention:Φ6,Φ8,Φ14,etc |
316L Titanium alloy | Power plant water Treatment industry |
| K=1.0 | 0.6MPa | 0~2000us/cm | 1/2 or 3/4 Thread Installation | 316L Titanium alloy and platinum | Water Treatment industry |
| K=10.0 | 0.6MPa | 0~20000us/cm | 1/2 or 3/4 Thread Installation | Polysulfone and platinum | Water Treatment industry |
| K=30.0 | 0.6MPa | 30-600ms/cm | 3/4 Thread Installation | Polysulfone | Acid cleaning |
| Cable | lower-noise cable/water proof cable | ||||
| BOQU Digital Conductivity Sensor | |||
| Model | DDG K=0.01/0.1/1.0 | K=10.0/30.0 | BH-485-EC |
| Range | 0~20us/cm,0-200us/cm.0-2000us/cm | 0~20000us/cm,30-600ms/cm | 0-2000us/cm |
| Temperature | 0~60C | 0~60C | 0~60C |
| Temperature compensation | NULLPT1000,PT100,10K,30K etc | ||
| Max pressure | 3bar | 3bar | 3bar |
| Material | SS304/SS316 | Polysulfone | PC |
| Thread | NPT3/4 | NPT3/4 | NPT3/4 |
| Cable | standard :5meters,10meters, (it can be extended to 100 meters) | ||
|
Model
|
SJG-2083CS
|
||||
|
Name
|
Online Acid-base Concentration Analyzer
|
||||
|
Sensor
|
Digital Inductive Conductivity Sensor
|
||||
|
Protection
|
IP65
|
||||
|
Power Supply
|
90 - 260V AC 50;60Hz
|
||||
|
Output
|
Two ways of 4-20mA
|
||||
|
Relay
|
Two relays ,5A;250V AC,5A;30V DC
|
||||
|
Size
|
144×144×104mm
|
||||
|
Protocol
|
RS485 Modbus RTU
|
||||
|
Range
|
0.00mS;cm~1000.00 mS;cm
|
||||
|
Accuracy
|
±0.1%FS,±0.5ºC
|
||||
Mainly Application of Best Water Treatment Online Digital pH Meter
In today's world, our earth faces many environmental problems, especially in water quality. As a leading manufacturer in water quality analyzers, BOQU Instrument will use all technologies to solve problems related to human and earth survival and always to be the guardians of the earth's water quality. BOQU Instrument's online water quality analyzer is mainly used to test pH, conductivity, TDS, dissolved oxygen, turbidity, residual chlorine, suspended solids,TSS, ammonia, water hardness, silica, phosphate, sodium, BOD, COD,Ammonia nitrogen ,total nitrogen,chloride,lead ,iron,nickel,fluoride,copper,zinc etc. mainly application for Agriculture,Food and Beverages,Water Analysis,Healthcare and Pharmaceutical,Paints and Dyestuff Industry,Cosmetics, Flavors and Fragrances,Electroplating Industry.
BOQU Instrument focuses on technological innovation in water quality analyzers and water quality sensors since founded at 2007. now staff is over 200 people and with an annual growth rate of 35%. we have own R & D center,many senior engineers has over 10 years R&D experience..Now BOQU has got more than 50 technical certificates for controller software and over 20 technical patents,therefore we won the National High-tech Enterprise Certificate in 2010.At present, the annual quantity of water quality sensors and meters is over 100,000pcs, it let BOQU instrument become the biggest factory in water quality analyzers in Shanghai China.
The BOQU Instrument is a young, energetic and professional team. We will continue to focus on R&D and manufacturing of high-end water quality monitoring instruments and sensors.we keep to create benefits for our customers,We work hard for the material and spiritual aspects of all employees,and contribute to the progress and development of humanity. forever to guard the earth's water quality.
BOQU Instruments is very popular in all global market, because BOQU Water quality anaysis instrument and sensors got most international certicates. As a responsible and high-tech enterprise in China,BOQU Instrument thinks there is still long way to go,so our production is strictly according to ISO9001 from source of raw material to finished instrument. And their is professional staff and test instrument to check each process.now our many instruments have reached or exceeded the world-class level. BOQU instrument also got many certificates such as CE, SGS,FCC and so on.
In order to provide better service for our customers, we will visit customers in different countries.Only in this way,then we could truly understand customer needs and help customers to choose right water quality analyzers and sensors.
FAQ of Power plant water Treatment industry EC probe
1. What am I measuring when I measure the conductivity of my solution?
){kind=link}